Connecting to our D-Star Repeaters

Register With D-star

If you have not registered with D-Star, you will need to do that before you will be able to connect to the repeater.  You do not have to register with this repeater, if you have registered on any D-Star repeater before you are good to go.  If you have not registered yet, Click Here to complete the registration.

KB3YBH Module B on 444.8

The 444.8 repeater has a positive offset, you will need to configure your D-star radio with the following details to be able to talk on the connected D-Star network:

Receive Frequency: 444.8
Transmit Frequency: 449.8 (a positive offset of 5 Mhz)
URCALL: CQCQCQ
RPT1: KB3YBH B (one space in between callsign and module ID for a total of 8 characters)
RPT2: KB3YBH G (one space in between callsign and Gateway ID)
My: Your Call Sign

KB3YBH Module C on 145.170

The 145.170 repeater has a negative offset, you will need to configure your D-star radio with the following details to be able to talk on the connected D-Star network:

Receive Frequency: 145.170
Transmit Frequency: 144.570 (a negative offset of .6 Mhz)
URCALL: CQCQCQ
RPT1: KB3YBH C (one space in between callsign and module ID for a total of 8 characters)
RPT2: KB3YBH G (one space in between callsign and Gateway ID)
My: Your Call Sign

If you can connect to the local repeater but cannot reach anyone on the reflector, be sure the RPT2 is setup with the G in the 8th character and that the call sign is KB3YBH.